Britax CHILD BOOSTER SEAT User Manual download pdf (Page 8)

There may be one of two types of Gated Slides available as

shown below provided with this harness. Only use Gated Slides

recommended for this Harness.

If curved Gated Slide, then the belt route through this can only go

one way as shown.

Before using the Protecta PLUS™ Harness with a Lap-Sash Seat

Belt, you need to convert the seat belt to a Lap Seat Belt by using

the Gated Slide provided.

IMPORTANT: Face the hollow side of the Gated Slide towards the

child. Do not use Gated Slide for any other purpose.

FOR USE WITH A LAP-SASH SEAT BELT AND

BOOSTER SEAT

A. Hold the lap and sash straps

together and fold as shown

below. Slide the inner strap into

the Gated Slide followed by the

outer strap.

Always ensure the Hollow side

is towards child

Curved Flat

Faces

towards

Child

Inner

Strap

Outer

Strap

Attachment Clip attaches to the

Versa-Tether™ Catch

ALTERNATIVE INSTALLATION INTO VEHICLE

WITH EXTENSION STRAP

An Adjustable Extension Strap is supplied with the Child Harness.

Hook the Protecta PLUS™ Harness clip rst onto the extension

strap catch, then hook the extension strap hook onto the Versa-

Tether™ Catch on the Booster Seat’s upper anchorage strap as

shown below. Remove excess slack from the Extension Strap by

pulling the adjuster strap as illustrated below.

1. Attachment clip from the Booster Seat

2. Versa-Tether™ Catch

3. Child Harness Attachment Clip

4. Anchor Fitting in the Car

5. Adjustable Extension Strap

6. Extension Strap Catch

7. Extension Strap Attachment Clip

Always attach the hook and remove the slack.

Pull to

remove

slack

2 3

HOW TO INSTALL & USEHOW TO INSTALL & USE

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 20 21

Comments to this Manuals

No comments

Britax CHILD BOOSTER SEAT User Manual Page 8

Comments to this Manuals

Related products and manuals for Car seat Britax CHILD BOOSTER SEAT