Britax Hi-Liner SG User Manual download pdf (Page 10)

HOW TO USE

INSTALLING SAFE-N-SOUND PROTECTA PLUS™ HARNESS

WITH EXTENSION STRAP INTO VEHICLE

An adjustable extension strap is supplied with the Child Harness. Hook the Safe-n-Sound

Protecta PLUS™ Harness clip rst onto the extension strap catch, then hook the extension

strap hook onto the Versa-Tether™ Catch on the Booster Seat’s upper anchorage strap

as shown below. Ensure that none of the straps are twisted or catching on sharp edges.

Tighten the Booster Seat’s upper anchorage strap (refer to page 13) then remove excess

slack from the extension strap by pulling the adjuster strap as illustrated below.

1. Attachment clip from the Child Harness

2. Versa-Tether™ Catch

3. Booster Seat Attachment Clip

4. Anchor Fitting in the Car

5. Adjustable Extension Strap

6. Extension Strap Catch

7. Extension Strap Attachment Clip

Pull to

remove slack

Attachment Clip attaches to

the Versa-Tether™ Catch

HOW TO USE

USING WITH A CHILD HARNESS (PURCHASED SEPARATELY)

This booster seat is only suitable for use with Safe-n-Sound™Protecta PLUS™Harness

Series 220/2010 or Babylove EzyGo Harness™ Series BL220/2010. Refer to the instruction

book supplied with the Child Harness for full details of using and installing the Child

Harness. When installing the Child Harness into the vehicle and booster seat, connect the

upper anchorage strap to the Versa-Tether™ Catch on the Booster Seat’s upper tether strap

(as shown below).

If required, use the extension strap supplied with the child harness for all other instances to

attach the harness to anchor points in the luggage area such as the vehicle oor or ceiling.

Not suitable for most other styles of child safety harnesses.

INSTALLING SAFE-N-SOUND PROTECTA PLUS™CHILD

HARNESS INTO VEHICLE WITHOUT EXTENSION STRAP

1. Attachment Clip from Child Harness.

2. Versa-Tether™ Catch.

3. Booster seat Attachment Clip.

4. Anchor Fitting in the car.

Child Harness Attachment Clip

attaches to the Versa-Tether™ Catch

NOTE:

Do not use the Versa-Tether™catch on the Child Harness Clip (1).

Versa-Tether™catch (2) is only for use with a Child Harness.

Hook the Child Harness

attachment clip (1) onto

Versa-Tether™ Catch (2). Then

hook attachment clip (3) onto

anchor tting. Ensure that

none of the straps are twisted

and not passing over any

sharp edges.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 20 21

Comments to this Manuals

No comments

Britax Hi-Liner SG User Manual Page 10

Comments to this Manuals

Related products and manuals for Car seat Britax Hi-Liner SG