Britax CHILD BOOSTER SEAT User Manual download pdf (Page 4)

TO BE USED WITH A LAP OR LAP-SASH SEAT BELT IN THE

BACK OF MOST CARS WITH FORWARD-FACING SEATS.

Do not use on any vehicle seat which faces

sideways or rearwards.

PARTS SUPPLIED IN THE PACKAGE:

• Protecta PLUS™ Harness

• Anchor tting, bolt and spacers.

• Adjustable Extension Strap

• Gated 3 bar slide

• Instruction Booklet

SUITABLE FOR USE

NOT SUITABLE FOR USE

HOW TO INSTALL & USE

To be used only in a forward-facing position.

Suitable for use when the child’s shoulders are

level with or below the seat back or headrest.

USING WITH A BOOSTER SEAT OR

CONVERTIBLE BOOSTER SEAT

The Protecta PLUS™Harness is suitable for Booster Seats and

Convertible Booster Seats for seating positions where a child

restraint anchorage is provided. Refer to the car’s owners

manual for positions. If an anchor tting is required refer to

pages 31 to 34. The following instructions provide details of

how the Harness can be used with a typical Booster Seat. The

Protecta PLUS™Harness has the means for the harness straps

feeding through the slots in the seat or over the top of the seat in

accordance with the Seat’s instructions. If you have a compatible

Booster Seat or Convertible Booster seat without Versa-Tether™

connection then refer to the connection method on pages 13 &

14. If your seat has a Versa-Tether™ connection refer to pages

11 & 12.

These instructions provide details for installing the Child Harness

with a Booster seat for either a lap only seat belt or a lap-sash seat

belt.

Hook Booster Seat attachment

clip to the anchor tting in

the Car

INSTALLING THE HARNESS TO THE BOOSTER

SEAT OR CONVERTIBLE BOOSTER SEAT

WITH SLOTS FOR CHILD HARNESS

Booster Seats and Convertible Booster Seats tted with the Versa

Tether™ connection system may require the Protecta PLUS™

Harness to be threaded through slots in the seat. Follow the seat’s

instructions. The following are general instructions.

Decide which seating position you are going to use and which seat

belt type is installed in that position (if using a lap-sash seat belt

then a Gated Slide must be used).

A. Ensure any headrest is set

to the correct height for

your child.

B. Hook the attachment clip

to the anchor tting and

tighten.

CAUTION:

ALWAYS FOLLOW THE BOOSTER SEAT OR CONVERTIBLE

BOOSTER SEAT INSTRUCTIONS AND LABELLING.

Lap Only belt Lap Only beltLap/Sash belt

1 2 3 4 5 6 7 8 9 ... 20 21

Comments to this Manuals

No comments

Britax CHILD BOOSTER SEAT User Manual Page 4

Comments to this Manuals

Related products and manuals for Car seat Britax CHILD BOOSTER SEAT