Vehicle SeatFor children approximately 7 years of age up to approximately 10 years of age when used with a lap only seat belt.Booster SeatFor use with
The Gated Slide needs to be close to the child but not touching the child. If armrests are included the Gated Slide needs to be under the armrest.Conv
Protecta PLUS™ HARNESS WITH BASIC BOOSTER AND BOOSTER CUSHIONUSING LAP ONLY SEATBELTThread the lap seat belt through the harness strap loops as shown.
22 23USING THE HARNESS WITH THE CAR’S SEAT AND SEATBELT This mode is used after the child has nished using a Booster Seat or Convertible Booster Seat
INSTALLING INTO VEHICLE WITH AN EXTENSION STRAP Hook attachment clip onto anchor tting in the car. Ensure that none of the straps are twisted or cat
Adjuster CoverStorage StrapG. Fold up excess strap and store with the storage strap and close the cover.D Thread the lap seat belt through the harn
H. Attachment clip and catch must be behind the seat back and away from your child’s head. If this is not the case either shorten or remove the Exten
30If you are using a booster seat and the child’s shoulders have reached the top height marker then you can use just the child harness and the lap onl
32PRE-INSTALLATION ANCHOR FITTINGPRE-INSTALLATION ANCHOR FITTING33Fig.4.Anchorage ClipClip CoverFront of VehicleFront of VehicleIF THE CAR IS FITTED W
34UPPER ANCHORAGE STRAP IMPORTANT: THE ATTACHMENT CLIP COVER (SEE FIGURE 4 ON THE PREVIOUS PAGE) MUST ALWAYS BE USED AS IT PREVENTS THE R
36AUSTRALIA Britax Childcare Pty. Ltd.A.B.N 55 006 773 600Head ofce and registered address99 Derby Road, Sunshine, Victoria 3020.PO Box 147 Sunshine,
INTRODUCTIONINDEXThe Protecta PLUS™ Harness is suitable for child use on a vehicle seat or in conjunction with any booster seat or booster cushion. It
NOTESNOTES3839The Safe-n-Sound, Protecta, Protecta Plus, SLIDEGUARD and Versa-Tether trademarks are the property of Britax Childcare Pty. Ltd. (Austra
The Protecta PLUS™ Harness can be used with all Booster Seats or Convertible Booster Seats that are suitable for use with this Series 220/2010 Child H
CAREFULLY READ AND FOLLOW ALL OF THE INSTRUCTIONS FOR INSTALLATION. INSTALL IN STRICT ACCORDANCE WITH THESE INSTRUCTIONS FOR MAXIMUM SAFETY. IF IN DOU
TO BE USED WITH A LAP OR LAP-SASH SEAT BELT IN THE BACK OF MOST CARS WITH FORWARD-FACING SEATS. Do not use on any vehicle seat which faces sideways o
Pass the left hand Strap and Attachment Clip through the right hand slotC. Lengthen the Child Harness using the adjuster under the cover (see the Ch
124INSTALLING INTO VEHICLE WITHOUT EXTENSION STRAPHook the Child Harness attachment clip (1) onto Versa-Tether™ Catch (2). Then hook attachment clip (
Pull to remove slackAttachment Clip attaches to the Versa-Tether™ CatchTo lengthen the Adjustable Extension strap rotate the adjuster and pull the mai
1415There may be one of two types of Gated Slides available as shown below provided with this harness. Only use Gated Slides recommended for this Harn
C. Repeat previous step A for the other slot in the Gated Slide.16D. Feed the straps through the Gated Slide to remove any slack. This has now convert
Comments to this Manuals