Britax CHILD BOOSTER SEAT User Manual download pdf (Page 12)

22 23

USING THE HARNESS WITH THE CAR’S SEAT

AND SEATBELT

This mode is used after the child has nished using a Booster

Seat or Convertible Booster Seat because their shoulders were

in line with the Upper Shoulder Height Marker. If you have not

already done so, check your car owner handbook for the location

of the car’s child restraint anchor tting. If there is no anchor

tting then read pages 31 to 34.

When installing the Protecta™ PLUS Harness into the vehicle

connect the upper anchorage strap to the anchor tting on the

parcel shelf.

Use the Adjustable Extension Strap for all other instances

requiring a longer strap to attach the harness to anchor points in

the vehicle oor or roof (See the following page).

INSTALLING INTO VEHICLE WITHOUT

EXTENSION STRAP

Hook attachment clip onto anchor tting. Ensure that none of the

straps are twisted or catching on sharp edges.

1. Child Harness Attachment Clip.

2. Anchor Fitting in the car.

Disengage seat belt tongue

and buckle, remove the lap

portion of seat belt from the

SLIDEGUARD™clip (where

provided) and remove Child

Harness and seatbelt from child.

NOTE:

It maybe easier to unthread the

car seat belt out of the loops

before lifting the child harness

over the child’s head.

Lift child harness strap

over child’s head.

TO REMOVE CHILD FROM HARNESS

AND SEAT

Once the child is too large for the booster seat, the Child Harness

can then be used with a lap only seat belt on the car’s seat. A

Child Harness is a signicant safety device for children in a lap

only seat belt. Refer to the following pages.

HOW TO INSTALL & USEHOW TO INSTALL & USE

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

No comments

Britax CHILD BOOSTER SEAT User Manual Page 12