Britax MARATHON 65 User's Guide download pdf (Page 23)

Push the child seat ﬁrmly into the vehicle 6

seat while removing slack ﬁrst from the

lap portion of the vehicle belt, then the

shoulder portion (Fig. D).

Hold the shoulder belt tight, then rotate 7

the lock-off until the vehicle belt is secured

(Fig. E).

If your vehicle is equipped with an automatic •

locking retractor (ALR), use of lock-offs is not

required as long as the ALR is locked. Check your

vehicle owner’s manual to determine the type of

retractor your vehicle has, and how to lock the

retractor.

Attach the Versa-Tether8

hook to the

designated tether anchor for the chosen

seating position. Remove all slack from the

tether to secure. Store excess webbing in

the tether pouch. See pages 25–28.

Verify that the vehicle belt is tight and the child seat is secure. 9

The child seat is secure when it cannot be moved front-to-back or side-to-•

side more than 2.5 cm (1 in.) at the belt path. If the child seat is not secure,

repeat this procedure or use an alternate seating location.

Installation: Forward-Facing

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

No comments

Britax MARATHON 65 User's Guide Page 23