26
Using the Versa-Tether
Consult your vehicle owner’s manual for 1
designated tether anchorage locations.
Locate the tether on the rear of the child 2
seat and remove the tether components
from the pouch.
Place the tether components up and over 3
the child seat back.
Install the child seat using the LUAS 4
system or the vehicle belts according to
the instructions in this manual.
Tilt the tether release tab then pull to 5
fully extend the tether strap into a “V”
shape.
Locate the hook on the strap and 6
loosely attach the tether to the vehicle’s
designated tether anchor.
See figure A for a forward-facing installation.•
See figures B and C for a rear-facing installation.•
Pull the tether adjuster strap to remove 7
all slack.
Verify there is tension in the tether strap and that child seat is 8
properly secured.
The child seat is secure when it cannot be moved front-to-back or •
side-to-side more than 2.5 cm (1 in.) at the belt path.
Installation: Versa-Tether
®
A
B
C
Comments to this Manuals